Angled Belt Conveyor
Angled Belt Conveyor are manufactured in a heavy-duty, industrial design which ensures an efficient conveying of products in the grain and feed industry, breweries, malt houses, biomassplants as well as products/granules from other industries.
Features:
Angled belt conveyors are material handling systems that use continuous belts to convey products or material. The belt is extended in an endless loop between two end-pulleys. Usually, one or both ends have a roll underneath. The conveyor belting is supported by either a metal slider pan for light loads where no friction would be applied to the belt to cause drag or on rollers. Power is provided by motors that use either variable or constant speed reduction gears.Drives can be located in different places on conveyor systems. A head or end drive is found on the discharge side of the conveyor and is the most common type. Center drives are not always at the actual center of the conveyor, but somewhere along its length, and are mounted underneath the system. They're used for reversing the direction of a conveyor.
Type of materialMaterial exampleMax. angle of inclinationHeight of cleatsh(mm): 16h(mm): 25h(mm): 32POWDERYFlour, lime etc.25°28°30°LOOSE FLOWINGGrains: corn, barley, wheat, rye, dray sand20/25°25/30°25/30°LOOSE ROLLINGGravel, ground stone25°28°30°STICYWet sand, ash, wet loam30/35°35/40°40/45°PACKEDSacks, jute sacks, paper sacks30/35°35/40°35/40°